Details

---

Aqua Solar L66 Solar Water Heater Malaysia (300 liters, c/w Installation)

L66 Technical Informations & Specifications

The L Series is suitable :
Residential / Commericial which requires :
• High temperature, mid efficiency
• Robust installation

FOR USAGE 6 TO 7 PEOPLE
 

L SERIES	L66
Warranty	9 Years Warranty + 1 Year Guarantee
OVERALL DIMENSION
Tank Capacity	66 Gallons (UK) 300 Litres
Overall Dimension (L x W x Di)	2438mm x 1820mm x 584mm
Weight – Full	398kg
Weight – Empty	93kg
STORAGE TANK
Tank Dimension	1830mm x 584mm
Outer Casing	Stucco Aluminium
Storage Tank Insulation	50mm High Density Polyurethane Foam (CFC Free)
Cylinder Material	Marine Grade Stainless Steel
Nominal Working Pressure	750 kPa
Test Pressure	1500 kPa
Relief Valve Setting	850 kPa / 99°C
Laminar Flow Stratifier	Yes
Electric Booster	3 kW
SOLAR COLLECTORS
Number Of panel	2
Surface Area (L x W x D)	1854mm x 16200mm x 70mm
Number Of Riser Tubes	20
Method	Plate and Tubes
Collector Panel	Matt Black Aluminium / Copper
Casing Material	Aluminium
Glass Material	3.2mm Tempered Glass
Efficiency	> 85%

 

 

Designed to Meet Local Requirement :
A range of 66 & 80 gallon models to suit your needs

Retain Heats :
50mm High density polyurethane foam to maximum heat retention.

Top Quality Material : 
High quality corrosion-free material such as stainless steel, copper and aluminum to ensure long life and performance.

Proven Safe :
About 70°C and safety feature of relief valve controls the heat pressures.

Back Up Heater : 
To ensure hot water during raining season or over usage.

Number of Riser Tubes : 
More tubes in the panel to ensure fast heating and optimum flow rate leading to higher efficiency and effectiveness.

 

 

Design

AQUASOLAR SOLAR WATER HEATING SYSTEM

 

EVERY HOME and family needs clean water – this daily essential is central to our contemporary lifestyle and its demands. Yet the delicate state of our environment today means that it is increasingly important that we use energy in a responsible and efficient manner. The average household uses 116,800 litres of hot water a year.

AQUASOLAR ^TM Water Heating Systems delivers the convenience of hot water on demand with the use of solar energy. Besides being good for the environment, AQUASOLAR ^TM can help you save up a substantial part of your energy bill too. Discover today how its modern, efficient design can take care of your heated water needs for years to come.

* Water consumption facts derived from Ministry of Natural Resources and Environment, Malaysia. Based on an average family of four persons.

ENSURE THE QUALITY OF PRODUCTION

Each AQUASOLAR^TM product features high quality aluminium, copper and stainless steel construction that offers years of trouble-free ownership and usage.

Each AQUASOLAR^TM water heating system comes with two collector panels – each with 10 copper risers paired with 2.97m² of collector fins with selective black coating for optimal heat conversion and performance-to-weight ratio.

Hot water is stored in a marine-grade 316L steel storage tank, which requires no sacrificial anodes to replace or rust and cracks to worry about. 316L steel tanks offer superior performance over industry standard 304 steel tanks.

All AQUASOLAR^TM products are designed to perform under high-pressure. High pressure solar heaters do not create a loss of pressure when water passes through it, which means homes using such systems only require one water pressure pump. On the other hand, low-pressure systems require one water pump for the cold water and another for the hot water.

THE THERMOSIPHON PRINCIPLE

 

AQUASOLAR^TM products rely on the thermosiphon principle to drive water through its system. Thermosiphon occurs when heated liquid rises and is replaced by cooler liquid in a closed circuit. As the cycle is repeated, the temperature of the liquid in the entire system is gradually raised.

Because there are no pumps or motors, AQUASOLAR^TM products are cost-effective to own, use and maintain.


 

 

Grundfos CM3-5PM1 (CMB3-46PM1) Water Booster Pump 

Grundfos CM3-5PM1 (Grundfos CMB3-46) Water Booster Pump

GRUNDFOS DOMESTIC BOOSTER PUMP CM3-5PM1 SUITABLE FOR 3-4 OUTLETS*

Grundfos CM3-5PM1 Water Pump Series 3-5 c/w PM1 PressureComtrol with built-in dry-running protection for automatic start/stop to provide and deliver instant water supply with good pressure for your daily needs. 
*Grundfos CMB3-46 PM is the replacement model of CM3-5PM1 (start from 1st of April 2021)
Grundfos CMB3-46 manual book. 

**Replacing Older model version CH2-50PC

*recommended outlets subject to size and specification of water fittings

 

Grundfos CM3-5PM1 Water Pump Price (Grundfos CMB3-46 Price)

CM-PM

The Grundfos CM-PM1 series pressure booster pumps is ideal for instant water heater showers while providing strong, constant water pressure around your house and garden. The CM-PM1 series is a compact, quiet yet powerful multistage pump with built-in pressure control and maintenance free design. Major pump components are manufactured from corrosion and wear resistant stainless steel for a longer life-span.

TECHNICAL DATA:

Power: 600 Watt
Discharge Pressure/ Output (psi/lpm): 69(max)/70(max)
Port Size (BSP): 1' inlet/outlet

 

FEATURES & BENEFITS OF GRUNDFOS CM-PM1:

○ Longer life - Major pump components are manufactured from corrosion and wear resistant stainless steel.
○ Quiet Operation - Both pump and motor are designed for quiet operation to provide a comfortable environment.
○ Quality Assurance - Each CM-PT is factory assembled and tested before delivery.
○ Product certified by SIRIM
○ Dru running protection
○ 2 years warranty (Extra 6 months for Online Registration)
○ Space saving
○ Easy installation